IgH EtherCAT Master  1.5.3
soe_errors.c
Go to the documentation of this file.
1 /******************************************************************************
2  *
3  * $Id$
4  *
5  * Copyright (C) 2006-2008 Florian Pose, Ingenieurgemeinschaft IgH
6  *
7  * This file is part of the IgH EtherCAT Master.
8  *
9  * The IgH EtherCAT Master is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License version 2, as
11  * published by the Free Software Foundation.
12  *
13  * The IgH EtherCAT Master is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
16  * Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License along
19  * with the IgH EtherCAT Master; if not, write to the Free Software
20  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
21  *
22  * ---
23  *
24  * The license mentioned above concerns the source code only. Using the
25  * EtherCAT technology and brand is only permitted in compliance with the
26  * industrial property and similar rights of Beckhoff Automation GmbH.
27  *
28  *****************************************************************************/
29 
35 /*****************************************************************************/
36 
37 #include "globals.h"
38 
39 /*****************************************************************************/
40 
44  {0x1001, "No IDN"},
45  {0x1009, "Invalid access to element 1"},
46  {0x2001, "No name"},
47  {0x2002, "Name transmission too short"},
48  {0x2003, "Name transmission too long"},
49  {0x2004, "Name cannot be changed, read only"},
50  {0x2005, "Name is write protected at this time"},
51  {0x3002, "Attribute transmission too short"},
52  {0x3003, "Attribute transmission too long"},
53  {0x3004, "Attribute cannot be changed, read only"},
54  {0x3005, "Attribute is write protected at this time"},
55  {0x4001, "No unit"},
56  {0x4002, "Unit transmission too short"},
57  {0x4003, "Unit transmission too long"},
58  {0x4004, "Unit cannot be changed, read only"},
59  {0x4005, "Unit is write proteced at this time"},
60  {0x5001, "No minimum input value"},
61  {0x5002, "Minimum input value transmission too short"},
62  {0x5003, "Minimum input value transmission too long"},
63  {0x5004, "Minimum input value cannot be changed, read only"},
64  {0x5005, "Minimum input value is write protected at this time"},
65  {0x6001, "No maximum input value"},
66  {0x6002, "Maximum input value transmission too short"},
67  {0x6003, "Maximum input value transmission too long"},
68  {0x6004, "Maximum input value cannot be changed, read only"},
69  {0x6005, "Maximum input value is write protected at this time"},
70  {0x7002, "Operation data value transmission too short"},
71  {0x7003, "Operation data value transmission too long"},
72  {0x7004, "Operation data value cannot be changed, read only"},
73  {0x7005, "Operation data value is write protected at this time"},
74  {0x7006, "Operation data value is smaller than the minimum input value"},
75  {0x7007, "Operation data value is greater than the minimum input value"},
76  {0x7008, "Invalid operation data"},
77  {0x7009, "Operation data is write protected by a password"},
78  {0x700A, "Operation data is write protected"},
79  {0x700B, "Invalid indirect addressing"},
80  {0x700C, "Operation data is write protected due to other settings"},
81  {0x700D, "Reserved"},
82  {0x7010, "Procedure command already active"},
83  {0x7011, "Procedure command not interruptible"},
84  {0x7012, "Procedure command is at this time not executable"},
85  {0x7013, "Procedure command not executable"},
86  {0x7014, "No data state"},
87  {0x8001, "No default value"},
88  {0x8002, "Default value transmission too long"},
89  {0x8004, "Default value cannot be changed, read only"},
90  {0x800A, "Invalid drive number"},
91  {0x800B, "General error"},
92  {0x800C, "No element addressed"},
93  {}
94 };
95 
96 /*****************************************************************************/
Global definitions and macros.
Code/Message pair.
Definition: globals.h:266
const ec_code_msg_t soe_error_codes[]
SoE error codes.
Definition: soe_errors.c:43